[JA20061004: Entropy]
Entropy in thermodynamics = the state of a gaseous or fluid system and the distribution probability of molecules
Entropy in information theroy by Shannon = a measure of information comparised in a given amount of signal
Shannon entropy measures the predictability of future amplitude values of the EEG based on the probability distribution of amplitude values already observed in the signal.
Probability density functions are histograms of amplitude values vs the number of sample EEG signals at each value
In awake state, the probability density function curve is skewed
In anaesthesia, the probability density function curve is more flat and uniform
Conceptually, there is no normalisation
--> Absolute value varies considerably between individuals
Therefore,
Cannot be used to measure depth of clinical anaesthesia between patients
EEG signals are first subjected to Fast Fourier transformation to identify sinusoidal components
--> A power spectrum is calculated
Then,
Shannon function is applied to the power spectrum to assign each frequency present a specific value
Thus,
Spectral entropy = the sum of these values
An anaesthetised person has more regular and orderly EEG
--> Power spectrum has more similar frequencies
--> When Shannon function is applied, spectral entropy number is low
Spectral entropy is used in M-Entropy module of the S/5 Anaesthesia monitor by GE Healthcare Finland
Sampling rate is 400Hz
EEG signals taken by frontal electrodes includes a significant electromyographic (EMG) component (which originate from facial muscle activity)
Lower frequencies (<32Hz) contains predominantly EEG signals
At higher frequencies, EEG power decreases exponentially
EMG has a wide noise-like spectrum and dominates at frequencies > 32Hz
State entropy is calculated over the EEG-dominant part of the spectrum
* 0.8 - 32 Hz
* Should reflect the cortical state of the patient
* Range of SE = 0 - 91
Response entropy is calculated over a frequency range from 0.8 to 47Hz
* Includes both EEG and EMG dominant spectrum
* Range of RE = 0 - 100
Inadequent analgesia
--> Increased EMG
--> Increased RE (relative to SE)
Thus,
RE should be an indirect measure of analgesia adequacy
When EMG power = 0
--> RE = SE
When EMG power > 0
--> RE > SE
Recommended range for both RE and SE = 40-60